Wednesday, January 8, 2014

Garage door repairs NYC- Faulty garage door sensor repair

Garage door sensors are safety devices that prevent the door from closing on people, pets or objects in the doorway. Garage door sensors are quite valuable tools as they can keep your child or pet safe. The bad news is that they may become faulty or even break sometimes. If the garage door sensor is not aligned properly, it can result in serious injury, or even death. This article helps you align the faulty garage door sensor and ensure safety.

Garage door sensors are located above the floor at each side of the door opening and generate a low-voltage beam that completes the electrical circuit when the door is activated. Garage doors may display a variety of symptoms when the sensors need attention. In most cases you can troubleshoot the system and correct the cause of problems. If you are not sure of the process call professional garage door repairs Brooklyn NY company for help.

Garage door sensors repair steps

Before you begin, make sure the electrical cord from the opener is plugged in and the electrical circuit is active.
 1. Clean the dust from electric-eye lenses on each sensor. Open and close the garage door repeatedly using the control on the garage wall or the remote unit from a vehicle. If the door does not close completely without hesitation, proceed with adjusting the sensors.

 2. Loosen the small nuts that hold each sensor to the L-brackets, just enough so that the sensors remain facing each other and can be moved by hand.

 3. Adjust each sensor in small increment by hand until the green or red power-indicator lights on each are illuminated. This indicates the electric eyes are aligned and the circuit is complete. Tighten the nuts on each sensor.

 4. Open and close the garage door repeatedly using the control on the garage wall or the remote unit from a vehicle. If the door does not close completely without hesitation, proceed to troubleshoot the electrical circuit.

 5. If adjusting the sensors does not work out, then the next step is to go check out the electrical circuit.  For this, unplug the power cord from the outlet and identify the connection terminals where the ends of the low-voltage senor wires attach. Reattach a loose wire to the appropriate terminal. Plug in the power cord and observe the lights on the sensors. If both lights are not illuminated, proceed to the next step.

 6. Inspect the double-strand insulated low-voltage wires from each sensor to the back of the garage door opener. If any you notice any damages, you should set right any bare, burned or broken wires in one or more places.

 7. If no damage is noted, one or both sensors must be replaced. For replacing garage door sensors call professional garage door repairs NY company to carry out the job for you.

Garage door repair services in NY

Garage door repair New York company, United Overhead Door Corp1 located at Yonkers, NY has been a trusted and reputable company serving local residents of Yonkers. The company offers both commercial garage door repair and residential garage door repair services, and it can provide fast service for urgent needs. United Overhead Door Corp is the right company to trust you are dealing with a broken garage door. To have the best value for money and dedicated repair solutions, it is important to choose an experienced garage door technician in a cost-effective manner.

1. United Overhead Door Corp: United Overhead Door Corp has over 50 years of experience in manufacturing, installation, repair of garage door in New York. All of the technicians are factory trained. If you need any garage door repair services call at 800-874-3667, fax at 914-964-0964 or you can send emails at info@uniteddoor.com. Office is located at 21 Saw Mill River Road, Yonkers, N.Y. 10701. For more information, visit: http://uniteddoor.com.

Thursday, January 2, 2014

Garage door repair and maintenance tips

A garage door is necessary for keeping the family car and other belongings stored in the garage safe, it is important that the garage door is regularly maintained. To ensure that the garage door is working properly throughout the year, perform basic routine maintenance on a regular basis.

Garage door repair Bronx Company, United overhead door corp1 that has over 50 years of experience in manufacturing, installing and servicing garage doors and garage door openers gives the following garage door maintenance and repair tips:
1. Check the moving parts of the garage door mechanism like hinges, roller tracks, and latches to make sure they are not bent or dented.
2. Keep the parts of the door well lubricated to prevent rusting. Wipe a little oil on all of the metal parts so they won’t rust and cause any of the parts to break or cause any dysfunction in the garage door.
3. The garage door opener will need regular maintenance also. Apply lubricant along the full length of it to prevent rusting.
4. Along with oiling the garage door components, make sure they are properly secured. Check the rails and the axles to make sure they are screwed in properly. There shouldn’t be any dirt on any of them left to build up over time.
5. In addition to all of the inner parts and components, the outer maintenance of the garage door is quite important too. Using a light detergent and water, wipe down the garage door to remove any dirt or dust that is stuck on the outside.
6. If the door is painted, make sure to paint the door regularly, and touch up as needed. There should not be any peeling paint on the door.
7. Seal any cracks in the door with caulk and add weather stripping to the door as needed, or replace the weather strip if needed. If the weather strip on the bottom of the door is cracked or broken, it will probably need to be replaced.
8. Examine the tracks for damage. If there are any dents, those can be hammered out. If not, then they will have to be replaced. Also make sure that the tracks are at level and that they are properly aligned.
9. Clean any dirt from the tracks as well. The tracks are a very important part of the garage door. There are times in which it would be wise to call a professional garage door repair NY company.  Any problem with the door that is beyond your knowledge should be taken care of by a professional. Attempting major repairs on a garage door can result in major injury if done incorrectly.

1. United Overhead Door Corp: United Overhead Door Corp has over 50 years of experience in manufacturing, installation, repair of garage door in New York. All of the technicians are factory trained. If you need any garage door repair services call at 800-874-3667, fax at 914-964-0964 or you can send emails at info@uniteddoor.com. Office is located at 21 Saw Mill River Road, Yonkers, N.Y. 10701. For more information, visit: http://uniteddoor.com.